China Rintangan Pakai Rintangan UHMWPE Bahagian Machined Plastik Manufacturers

Rumah > Produk-produk > UHMWPE Products > Produk UHMWPE lain > Rintangan Pakai Rintangan UHMWPE Bahagian Machined Plastik

Rintangan Pakai Rintangan UHMWPE Bahagian Machined Plastik

Berkongsi untuk:

Harga seunit:

USD 3 - 3.5 / Piece/Pieces

Jenis bayaran:

L/C,T/T,D/P

Incoterm:

FOB,CFR,CIF

Pesanan minimum:

100 Piece/Pieces

Maklumat asas

Model No.: UHMWPE Part

Jenama: HAITENG

Additional Info

Pembungkusan: Kotak Kertas

Produktiviti: 300000Pcs/Month

Pengangkutan: laut,Tanah,Air

Tempat asal: Yangzhong China

Sokongan mengenai: 300000Pcs/Month

Sijil: ISO

Kod HS: 39209910

Port: Pelabuhan Shanghai

Jenis bayaran: L/C,T/T,D/P

Incoterm: FOB,CFR,CIF

Penerangan produk

Rintangan Pakai Rintangan UHMWPE Bahagian Machined Plastik

Ciri-ciri
-Rasa haus yang hebat
-Bekerja di bawah suhu -200 ° C hingga + 80 ° C
-Pengurangan dan pengurangan hingar
-Chemical resistant
- Tiada penyerapan air
-Anti-pelekat
-Food safe
-Berat ringan

Imej

Customized Uhmwpe Part

UHMW PE adalah sejenis plastik kejuruteraan dengan harga sederhana dan sifat unggul. Ia hampir menggabungkan semua sifat cemerlang plastik. Ia mempunyai rintangan lelasan cemerlang, rintangan hentaman tinggi, sifat pelincir diri, keupayaan yang luar biasa terhadap berat badan sejuk, mesra alam dan ringan.

Helaian Data Teknikal

PROPERTIES	Unit	Value
I.Physical Properties
Density	g/cm3	0.96
Water absorption 24hrs	%	0.01
II.Thermal Properties
Heat deflection temperature - HDT/A	ºC	42
Min. service temperature	ºC	-269
Max. service temperature-Long Term	ºC	90
Thermal conductivity at 23 ºC	W/(K*m)	0.42
Coefficient of linear thermal expansion	10-4*K-1	2
Flammability Rating(6mm thickness)	-	HB
III.Mechanical Properties at 23ºC
Tensile strength at yield	MPa	17
Tensile strength at break	Mpa	40
Elongation at break	%	>50
Modulus of elasticity after tensile test	MPa	650
Modulus of elasticity after flexural test	MPa	800
Hardness - Shore D		61
Charpy impact strength	kJ/m2	N. B.
Friction coefficient		0.25
IV.Electrical Properties at 23ºC
Dielectric constant at 1 MHz	106Hz	3.1
Dielectric loss factor at 1 MHz	106Hz	0.0001
Volume resistively	Ohm (Ω) * cm	>1014
Surface resisively	Ohm (Ω)	>1011
Dielectric strength	kV/mm	45
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m